|
|
HowTo: Metal SSR Enclosure.
( Orien Love)
Step 5 : Bend and drill your angle.
|
| | My angles measure 1.75” X 2.6” with the bend at 1”. I laid the angle up to the SSR’s and marked the holes. I drilled these holes and mounted it temporality to the SSR’s, I installed the SSR board into the Box and marked 2 holes to mount it with. I removed the angle from the board and drilled the remaining 2 holes. I then used this piece as a template for drilling future angles. The length of the second side (opposite the 1” side) is not critical, I am using scrap material so some of the lengths are different.
|
|
|
