|
|
HowTo: Compact 4 Port SSR Box
( Frank Kostyun)
Step 4 : Add the Output Wires
|
| | Next, you will need to solder on the wire that will go to the outlets. I use approx 4" of #12 (stranded) wire for outputs 1 and 2, and 6" of wire for outputs 3 and 4.
I have also drilled two holes into the circuit boards for puting in screws that allow me to mount them into the electical box. I use 10-32 screws, with two nuts for standoffs. Note the electical tape under the one nut to prevent shorting. (even though the nut doesn't touch, I juse want to be safe.) I also drill two mounting holes in the bottom of the box before I put the screws in.
Photo is of two completed SSR assemblys ready to be installed into a box.
|
|
|
