|
|
HowTo: Ledtriks Led Panel
( Robert Jordan)
Step 2 : The panel
|
| | I choose to build a panel with 48 columns and 16 rows. I built it using a plastic pegboard available from Lowes. It cost around $13. It comes in white which I didn't think would be the right color for the job so I used a can of plastic primer spray paint and a can of flat black to resolve the issue. I started by sanding the front with fine sandpaper to prep it for the paint and I sanded the back with a fairly heavy grit to scratch it up good. You will see why this is needed later. I then cleaned it up with soap and water, let it dry and then primed, and painted it. Do not paint the back. I attached a picture of it at this point.
|
|
|
