|
|
8-Circuit Control Box (Hill Robertson)
This is the very beginning of the circuit building process. I only have a few photos. I'll add more later. This shows the front of the perf board with the template of where the ICs and other components will mount. I build my own SSRs with opto-couplers, triacs, and resistors.
NOTE: As you can see, each perf board sheet makes two boards (enough for two boxes). |
 |
| Here is the back of the same board. This shows where the components will be wired together. |
 |
| This shows some of the holes drilled in the box. This is the back of the box showing where the outlets will come out. |
 |
| This shows the box after mounting the indicator lights in the front. |
 |
| This shows the front of the completed 8-Port box. |
 |
| Here is the back of the 8-Port box. |
 |
| Her you can see a closeup view of the components that make up each SSR. |
 |
Here is a view of the inside of one of my completed 8-Circuit Control Boxes.
|
 |
|
|
