HowTo: Metal SSR Enclosure.
(
Orien Love)
Step 2 : Mount IEC connector and Fuse Holder
|
| |
Using a drill bit drill a hole in the 1/2 “ knockout next to the 3/4 “ opening you made in the previous step. The drill bit should be large enough to accommodate the fuse holder you are installing.
After the hole is drilled install the IEC connector into the 3/4 “ knockout you removed in step #1 with my box and IEC connector all that was needed was firm pressure to press the connector into the hole.
Next mount the fuse holder into the hole you drilled and secure.
|
