Step 1 : Punch out knockouts in 4 square box
|
| |
This HowTo Requires the following supplies:
1 – Metal 4” Square box (deep preferred)
1 – Dual duplex receptacle 4” square box cover.
1 – Piece of aluminum angle.
2 – Duplex receptacles.
1 – Fuse holder.
1 – IEC Connector.
1 – SSR board with isolated triac's.
Misc. supplies including wire, crimp connectors, bolts, nuts, ect.
My costs for a complete setup, including SSR board, and power cord was $16.07
The first step involves removing the 3/4" knockout on the side as well as the 1/2" knockout in the center on the opposite side.
|
