|
|
HowTo: Output Tester for 595 and Renard boards
( Wayne James)
Step 1 : Getting ready
|
| |
OK, you've built your 595 board and you have LED's lit up, so now you need to know if the signal making it out of the board. This tester will tell you.
It is a simple pocket tester that you can use to check your boards and the cat5 you run to your SSR's.
Disclaimer... If you use any of the information provided here, you do so at your own risk. Any bad things happen from using this 'How To", it is 100% your liability.
|
|
|
